一种地月转移轨道中途修正的制导算法

针对地月转移轨道中途修正问题，提出了一种求解修正速度增量的制导算法。该算法由初值设计和精确解求解两部分组成。首先，利用伪状态理论，通过简单迭代设计中途修正的初值，并通过Vinti预报方法修正了地球扁率的影响。然后，在求解精确解时，提出了一种基于伪状态理论的状态转移矩阵解析算法。该算法通过设计高精度的初值，降低了求解地月转移轨道中途修正问题的难度，而且避免了传统数值方法计算状态转移矩阵的复杂性。数值仿真结果表明，该算法可有效求解中途修正问题。     

基于测试数据的卡箍非线性等效建模方法

为了快速准确地计算卡箍管路系统的振动响应，提出了基于测试数据的卡箍非线性等效建模方法。对卡箍直管系统进行低幅值激励的模态测试，利用试验数据对有限元模型进行修正，识别卡箍线性刚度、线性阻尼参数。对卡箍直管系统开展不同激励水平下的恒力测试，通过样条插值多项式法将恒力频响函数转换为恒位移、恒速度频响函数，并进一步识别卡箍非线性等效刚度、非线性等效阻尼，建立了考虑卡箍非线性的等效动力学模型。研究表明:该卡箍等效动力学模型的预测频响函数与试验频响函数的最大误差仅为-6.9%，可以有效地反映卡箍实际的刚度、阻尼特性，对解决卡箍管路系统的振动响应分析具有重要的指导意义。      

离心压缩机密封及空腔流动的一维/三维耦合建模研究

为了在保证数值预测精度的同时降低离心压缩机的建模复杂度,以一维密封泄漏计算替代完整的密封及空腔建模,开展了离心压缩机盖盘密封及空腔流动的源项建模方法研究。结果表明:基于源项方法的密封及空腔简化建模仅需在主流道建模基础上施加泄漏质量流量、总温和摩擦损失源项边界条件,即可较高精度地还原完整的盖盘密封及空腔建模的性能和关键流动细节。与完整建模相比,在全工况下源项建模预测的等熵效率的绝对偏差小于0.65%,总压比和等熵效率的相对性能偏差小于1%。该方法可在满足下游部件匹配设计精度需求的同时,减少50%以上的网格数量,并显著提高计算的经济性和收敛性。泄漏流量的计算精确度是影响源项建模法性能预测准确性的最关键因素,耦合建模可以采用一维计算中推荐的密封泄漏系数值。      

熔融沉积成型连续碳纤维增强尼龙蜂窝芯材的压缩特性

采用熔融沉积成型方法成形了连续碳纤维增强尼龙复合材料蜂窝芯材,并对不同测试方向的静态单轴压缩特性进行了表征分析,着重关注不同测试方向熔融沉积成形蜂窝芯材平面静态压缩破碎行为和能量吸收行为,并与纯聚合物基体进行对比。结果表明:X_1方向的压缩平台区域的力-位移曲线更加平滑稳定,且载荷值稍高于X_2方向,因此X_1方向更适用于能量吸收应用;此外,连续纤维的增强作用可使蜂窝芯材的平台载荷值得到明显提升。研究结果为连续纤维增强聚合物复合材料的空间增材制造提供理论基础。     

Modeling irregular small bodies gravity field via extreme learning machines and Bayesian optimization

Close proximity operations around small bodies are extremely challenging due to their uncertain dynamical environment. Autonomous guidance and navigation around small bodies require fast and accurate modeling of the gravitational field for potential on-board computation. In this paper, we investigate a model-based, data-driven approach to compute and predict the gravitational acceleration around irregular small bodies. More specifically, we employ Extreme Learning Machine (ELM) theories to design, train and validate Single-Layer Feedforward Networks (SLFN) capable of learning the relationship between the spacecraft position and the gravitational acceleration. ELM-base neural networks are trained without iterative tuning therefore dramatically reducing the training time. Analysis of performance in constant density models for asteroid 25143 Itokawa and comet 67/P Churyumov-Gerasimenko show that ELM-based SLFN are able learn the desired functional relationship both globally and in selected localized areas near the surface. The latter results in a robust neural algorithm for on-board, real-time calculation of the gravity field needed for guidance and control in close-proximity operations near the asteroid surface.     

Simulating planetary wave propagation to the upper atmosphere during stratospheric warming events at different mountain wave scenarios

Parameterization schemes of atmospheric normal modes (NMs) and orographic gravity waves (OGWs) have been implemented into the mechanistic Middle and Upper Atmosphere Model (MUAM) simulating atmospheric general circulation. Based on the 12-members ensemble of runs with the MUAM, a composite of the stratospheric warming (SW) has been constructed using the UK Met Office data as the lower boundary conditions. The simulation results show that OGW amplitudes increase at altitudes above 30 km in the Northern Hemisphere after the SW event. At altitudes of about 50 km, OGWs have largest amplitudes over North American and European mountain systems before and during the composite SW, and over Himalayas after the SW. Simulations demonstrate substantial (up to 50–70%) variations of amplitudes of stationary planetary waves (PWs) during and after the SW in the mesosphere-lower thermosphere of the Northern Hemisphere. Westward travelling NMs have amplitude maxima not only in the Northern, but also in the Southern Hemisphere, where these modes have waveguides in the middle and upper atmosphere. Simulated variations of PW and NM amplitudes correspond to changes in the mean zonal wind, EP-fluxes and wave refractive index at different phases of the composite SW events. Inclusion of the parameterization of OGW effects leads to decreases in amplitudes (up to 15%) of almost all SPWs before and after the SW event and their increase (up to 40–60%) after the SW in the stratosphere and mesosphere at middle and high northern latitudes. It is suggested that observed changes in NM amplitudes in the Southern Hemisphere during SW could be caused by divergence of increased southward EP-flux. This EP-flux increases due to OGW drag before SW and extends into the Southern Hemisphere.     

云制造环境下机床装备资源选择方法

针对云制造环境下机床装备资源具有数量大、异质异构、服务制约因素多等问题，提出了基于多准则决策的机床装备资源选择方法。首先，利用本体论对机床装备资源建模，将物理资源虚拟化封装，实现虚拟资源与物理资源的逻辑映射。进一步地，使用语言变量量化决策者评估信息，采用模糊决策与试验评价实验室（FDEMATEL）和熵值法（EW）相结合的组合赋权法，引入模糊VIKOR（FVIKOR）多属性决策方法对机床装备资源进行综合评估，建立FDEMATEL-EW-FVIKOR的多准则混合决策模型。最后，将该方法应用于某生产制造企业，实验对比决策结果验证了多准则混合决策模型的可行性和有效性。     

PBT弹性体微相分离及对其力学性能的影响研究

为了获得微相分离对宽温PBT叠氮聚醚弹性体力学性能的影响规律,用红外光谱分析法(FT-IR)和动态热力学分析法(DMA)研究了PBT叠氮聚醚弹性体产生微相分离的机理和影响因素。用调节硬段含量、交联参数的方法调控其微相分离,控制适当的微相分离程度可显著改善推进剂的力学性能。研究结果表明:在二元醇扩链的弹性体体系中,当硬段含量约为15%时,弹性体发生相对最大比例的微相分离,体现出较佳的综合力学性能。通过微相分离的调控可获得宽温范围内综合力学性能较好的叠氮聚醚推进剂用粘合剂基体材料。     

面向空间天线的TWF复合材料性能研究

利用碳纤维三向编织物（triaxial woven fabric，TWF）作为增强材料，与柔性基体材料硅橡胶复合，制成兼具一定柔性和刚性的复合材料壳膜结构，用于卫星天线反射器，是一种新型的高精度可展开天线实现方案。采用复合材料细观方法，对碳纤维增强硅橡胶TWF复合材料进行了力学性能的研究。首先由纤维和基体的材料特性得到均质纤维束的材料特性；接下来考虑纤维束交织情况（起伏波动）建立由纤维束组成的单胞实体有限元模型；然后对单胞实体有限元模型进行均匀化分析，施加周期性边界条件，最终得到等效的均质材料特性；为满足天线反射器高性能需求，分析了碳纤维种类、纤维体积分数对单胞等效性能的影响规律。对该材料力学性能的研究，可以为其未来应用于大型高精度可展开天线反射器提供一定的理论依据。     

大跨时空任务背景下的太阳能无人机任务规划技术研究进展

通过任务规划技术合理的优化太阳能无人机的飞行轨迹和动力学参数，能够有效提高太阳能无人机的能量利用率，使其胜任许多大范围跨时间跨空间飞行任务。从能量建模、续航评估和能量管理策略3个方面对大跨时空任务背景下太阳能无人机任务规划技术的研究进展进行了综述。在能量建模方面，介绍了当前主流的太阳辐射模型和能量生产基本框架；在续航评估方面，分析了目前的指标设计和应用方法；在能量管理策略方面，从能量综合应用、风力滑翔机制、轨迹优化方法和面向特定任务的应用4个角度，梳理了当前的研究现状。最后，对该领域未来可能的研究方向进行了展望。